Net-Zero Energy Is Now ‘In the Grasp’ of Wastewater Treatment Facilities

Primary tabs

Net-Zero Energy Is Now ‘In the Grasp’ of Wastewater Treatment Facilities

tweet me:
Water resource recovery facilties can now get to net-zero energy. Here's how: #energyneutral
Wednesday, July 27, 2016 - 8:00am

CAMPAIGN: Smart City/Smart Utility

CONTENT: Article

It is commonly known that wastewater possesses more energy than needed to operate a treatment facility, but the number of net-zero energy water resource recovery facilities (WRRFs) is still very low worldwide. Yet, a recent study states that the possibility of net-zero energy is now in the grasp of many wastewater facilities, and the report provides some of the best insights on record as to how to achieve such results.

The study, commissioned by the Water Environment Research Foundation (WERF), identifies approaches to reduce energy use and maximize energy production in water resource recovery facilities. The goal is to demonstrate ways wastewater treatment facilities can operate solely on the energy from the water and wastes they treat.

Stephen Tarallo, a Client Services Director for Black & Veatch’s water business, served as co-principal investigator for the project, which is titled “Net-Zero Energy Solutions For Water Resource Recovery Facilities”(ENER1C12).

“The research offers guidance for selecting the combination of technologies and energy management best practices to most effectively achieve energy neutrality at WRRFs,” Tarallo said. “We wanted to demonstrate how to maximize resource recovery through harnessing the chemical, thermal, potential and kinetic energy contained in the treated wastes.”

Real-Life Statistics and Energy Flow Models Yield Valuable Information

The study included a detailed survey of approximately 40 WRRFs in North America and Australia, which yielded valuable statistics about energy use. In addition, nine industry leaders in net-zero energy wastewater treatment were selected from the 40 WRRFs for the development of case studies to document energy management lessons learned and best practices.

According to the WERF research, energy neutrality is within the grasp of water resource recovery facilities that use the conventional activated sludge process for biochemical oxygen demand (BOD) reduction (basic secondary treatment) and nitrification. But no two facilities are alike. In fact, the research team modeled the energy flows of 25 typical WRRF configurations, ranging from basic secondary treatment to membrane bioreactors for nutrient removal and water reuse. Facility operators can use these model results to find a configuration that is similar to their plant.

The research team also investigated the energy efficiency and energy recovery performance of 18 emerging technologies and processes in a variety of treatment plant configurations. The team used combinations of best-practice and these pioneering ideas to develop 10 hypothetical model facilities that approach or exceed energy neutrality.

Best in Class of Modeled Facilities

The best overall performance was observed for a plant that consisted of chemically enhanced primary treatment (CEPT) followed by BOD-only activated sludge treatment, then anaerobic digestion, including thermal hydrolysis pre-treatment of feed sludge and co-digestion of market-available fats, oils and grease (FOG) and food waste, and combined heat and power (CHP). That facility reached an energy rating of 139 percent, meaning it met its actual energy usage plus nearly 40 percent more.

The team also developed criteria to assess the triple-bottom-line (social, environmental and financial) sustainability score of six different biosolids management options. The results showed that anaerobic digestion with co-digestion, as well as CHP followed by land-application of biosolids, had the best overall sustainability score.

For minimizing energy use, the study showed that best practices include:

  • The use of clean and properly maintained fine-bubble diffusers;  
  • Use of high-efficiency motors and generators operating near their design point;  
  • Maximization of solids capture in sludge processing;
  • Maximization of primary sludge capture efficiencies;
  • Co-digestion of fats, oil and grease/food waste in anaerobic digesters;
  • Use of anoxic zones for energy recovery in nitrification plants.

The research on energy savings showed that improving primary treatment and solids capture in thickening and dewatering processes had the most significant total positive impact of all the best practices modeled.

“We found that the full combination of best practices reduces net energy use by roughly 40 percent compared to typical performance,” Tarallo said. “This is significant and demonstrates that proven technologies already exist for WRRFs to make a significant dent in their energy use.”

A Lofty but Reachable Goal

Tarallo said net-zero energy is a lofty goal that requires detailed planning and sustained commitment.

“The main challenges are different for each utility,” Tarallo said. “I would characterize the main challenge for biological nutrient removal (BNR) and membrane bioreactor (MBR) facilities as being technical – the technologies are just not sufficiently advanced at this time to confidently achieve the goal. For conventional and nitrification WRRFs, where technologies are available and well-proven, the challenges are more organizational and financial in nature.”

He said the overriding driver for success in all cases is strong leadership – a champion for the cause.

“We had the pleasure to speak with a variety of energy management champions about their utilities' challenges and accomplishments. The passion that all of these leaders possess is infectious.”

Keywords: Ethical Production & Consumption | Alternative Energy | Black & Veatch | Business & Trade | Carbon Footprint | Clean Tech | Conservation | Corporate Social Responsibility | Energy | Energy Efficiency | Environment & Climate Change

CAMPAIGN: Smart City/Smart Utility

CONTENT: Article